Madison Medallion Stencil

Madison Medallion Stencil
Madison Medallion Stencil
  • 9-madison-medallion-stencil-ceiling-DIY-decor-actual
  • 8-Madison-Medallion-stencil-Template-Instructions
  • 4-madison-ceiling-medallion-stencil-DIY-home-improvement
  • 3-madison-seiling-medallion-stencils-DIY-ceiling-decor
  • 1-madison-medallion-stencil-DIY-ceiling-decor
Price: $52.95
Sku: MC004
Add to Cart

Add to Wishlist

Free Stencil! Single overlay stencil.
Sheet 22.9"x41.7",
Design 19.95"x37.65"
Center circle diameter: 4.5"
Finished Medallion is 37.75" in diameter.
This elegant Madison Medallion stencil adds instant class to your room. Try stenciling it around a light fixture, or it in the middle of the ceiling. it looks great as a floor medallion too. Looks stunning stenciled in gold metallics!  We recommend using stencil spray adhesive when working with ceiling stencil designs, but painters blue tape works OK too.

If you compare our stencil thickness, size, design quality and prices, you will be amazed at the value that Cutting Edge Stencils offer!

Be creative: use different colors for different elements of the design, add shading - possibilities are endless. 

This medallion stencil is so easy to use - virtually anyone can do it. It's better to remove the light fixture when you stencil, but you can stencil with the fixture in place, too. You'll need to mist the stencil with spray adhesive (Elmer's is great) then tape the stencil to the ceiling using BLUE painter's tape, then load your foam roller with the paint of your choice (latex or acrylic). Get rid of excess paint by rolling the foam roller over a folded paper towel. Then, just roll it over the stencil applying medium pressure for an instant fabulous result! Don't press on the roller too hard otherwise you might get some bleed. Remove the stencil, rotate it 180 degrees, tape it and do it again.

Please make sure you watch our short step-by-step Video Tutorials!
You'll find them extremely helpful for your stenciling project. Even beginners get great results!

Stenciling on rough or textured walls may contribute to increased paint bleed. For more information on stenciling on textured walls, see our F.A.Q. section.

If you want to minimize paint seepage or are using high contrasting colors, adhesive is very helpful (Elmer's spray adhesive seems to be the best).  Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats.  Clean-up tip: Spray the stencil with Simple Green to help to remove adhesive residue.

About paint seepage :
 Even with a proper loaded roller and correct technique you might get some minor paint seepage here and there. In most cases it's not noticeable, especially from a couple of feet away and it can be easily touched up with a small brush. Don't forget that you're creating a "hand-painted wall finish".  A few imperfections and some paint seepage here and there are natural and inevitable for this type of work. To minimize seepage, use spray adhesive and less paint on your roller and brush.

Did you know you can stencil your own fabric and use it for curtains, tablecloths, pillows, etc.? When stenciling on fabric, please use stencil adhesive to ensure good results. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. You'll get better results with stencil brushes, but sometimes roller can work too, depending on your fabric.  Add some textile medium ( sold in craft stores) to your acrylic paint. You can also get a specially formulated fabric paint, but, frankly, good craft acrylic paint with a dollop of textile medium mixed in works just as well, and costs way less! :)  Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20-30 seconds on a LOW setting through the piece of cloth. Heat-setting will cure the paint and will prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. We have stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture.

All of our stencils are made of thick, sturdy but flexible 12 mil clear plastic, reusable, easy to clean and stenciler-friendly! In our 20+ years of professional stenciling this material has proven to be far superior than any other material we used, including the industry standard 8 mil mylar.
We are certain you'll notice the difference and will love working with it, just like all the folks who already bought our stencils.

Our stencils are made to last and with proper care and storage will serve you for a long time.

Our phone#