Cars Allover Stencil

  • 9-cars-wall-stencils-for-play-rooms-nurseries
  • 8-cars-allover-wall-pattern-stencil-for-nursery-layout
  • 7-Cars-allover-wall-stencil-nursery-decor
  • 6-Cars-Allover-wall-stencil-kids-playroom
  • 5-Car-stencils-wallpaper-nursery-DIY
  • 4-Car-stencils-kids-playroom-walls
  • 3-Cars-stencils-boys-room-nursery.jpg
  • 2-Cars-stencils-nursery-kids-room
  • 1-Cars-stencils-walls-nursery-grey-decor
Price: $39.95
Sku: NDA001
Add to Cart

Add to Wishlist

Free Stencil! Single overlay allover stencil.
Sheet: 24.7" x 29.45", Design: 21.8"x25.65"
Free Top Edge Stencil included!
Our Cars Allover Stencil is a fun and whimsical way to add color and pattern to your little one's nursery!  You can stencil this pattern in one color or get creative and use many colors. A traffic jam has never been so fun! Perfect decorating idea for little boys or girls playroom.

Stencil features an easy registration system, just use a part of the previously painted design to align the stencil, check for level and continue. This gives you a seamless "wallpaper" look.  Don't worry about super perfect alignment: in the end your eye will never ever notice the discrepancy. 

This stencil pattern comes with an additional FREE Top edge stencil: the upper part of the design cut as a smaller separate stencil. It makes it easy to fill the gaps close to the ceiling line after your main pattern is stenciled.

Want to learn how to stencil an allover pattern? Here are the detailed illustrated step-by-step Damask/Allover Stenciling Tips.

This is an easy design to stencil with a mini dense foam roller. Use a separate roller for each color. For expert stenciling tips, please watch our How-to stencil videos! You'll find them extremely helpful for your stenciling project. Even beginners get great results!

While prior stenciling experience is a plus for allover stencil patterns, even beginners get great results!  This easy-to-use design is recommended for feature/accent wall or entire room. It also works for furniture and fabric embellishment.

Try this stencil with our Clip-On Stencil Level, (sold separately) and discover how easy it is to achieve perfectly level results without dealing with those bulky heavy bubble levels and expensive laser levels.

Although our stencils do not require the use of spray adhesive, you may use it to minimize paint seepage (Elmer's spray adhesive seems to be the best). Make sure you shake the can well and lightly mist (not drench) the stencil, and let it dry for a moment before positioning it on the wall. This step will prevent the adhesive residue transferring to the wall. You'll need to re-mist the stencil after a few repeats. Note: you will still need to hold the stencil in place with a few pieces of blue painters tape! Adhesive by itself is not enough to hold the stencil on the wall. Clean-up tip: Spray the stencil with Simple Green to help to remove adhesive residue. Please remember that it's usually not possible to remove all of the glue residue from the stencil.

Stenciling on rough or textured walls may contribute to increased paint bleed. For more information on stenciling on textured walls, see our F.A.Q. section.

About seepage and imperfections: Even with a proper loaded roller and correct technique you might get some minor paint seepage here and there. In most cases it's not noticeable, especially from a couple of feet away and it can be easily touched up with a small brush. Don't forget that you're creating a "hand-painted wall finish".  A few imperfections and some paint seepage here and there are natural and inevitable for this type of work. To avoid seepage, use spray adhesive and less paint on your roller and brush.

Did you know you can stencil your own fabric and use it for curtains, tablecloths, pillows, etc.? When stenciling on fabric, please use stencil adhesive to ensure good results. First, tape your ironed fabric to the surface so it doesn't move around while you stencil. You'll get better results with stencil brushes, but sometimes roller can work too, depending on your fabric.  Add some textile medium ( sold in craft stores) to your acrylic paint. You can also get a specially formulated fabric paint, but, frankly, good craft acrylic paint with a dollop of textile medium mixed in works just as well, and costs way less! :)  Let the stenciled image dry completely, 24 hours is best, then heat-set it by ironing the fabric for about 20-30 seconds on a LOW setting through the piece of cloth. Heat-setting will cure the paint and will prevent it from being washed off in the washing machine. Always experiment with a sample of your fabric first to ensure good results. We have stenciled on silk, cotton, linen and even sheer fabrics with great results. It's always better if your fabric doesn't have too much texture.

All of our stencils are made of thick, sturdy but flexible 12 mil clear plastic, reusable, easy to clean and stenciler-friendly! In our 20+ years of professional stenciling this material has proven to be far superior than any other material we used, including the industry standard 8 mil mylar.

We are certain you'll notice the difference and will love working with it, just like all the folks who already bought our stencils.

Our stencils are made to last and with proper care and storage will serve you for long time.

Our phone#